BNKNM - PRISMA UNIVERSAL BOND 3 ADHESIVE
- MSDS: BNKNM
- Manufacturer: CAULK DENTSPLY
- Product Name: PRISMA UNIVERSAL BOND 3 ADHESIVE
- National Stock Number: 6520-01-344-0486
Product Identification
Product ID:PRISMA UNIVERSAL BOND 3 ADHESIVE
MSDS Date:11/13/1990
FSC:6520
NIIN:01-344-0486
MSDS Number: BNKNM
Responsible Party
MILFORD, DE 19963-0359
US
Emergency Phone: (302) 422-4511
Info Phone: (302) 422-4511
Cage: 11107
Contractor
Telephone: 302-422-4511/ 703-451-1900
Cage: 11107
Ingredients
ACRYLIC MONOMERS (10-50%)
ELASTOMER
GLUTARALDEHYDE
CAS: 111-30-8
RTECS: MA2450000
OSHA PEL 0.2 PPM
ACGIH TLV: C 0.82 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION & CORNEAL DAMAGE.
INHALATION: ALLERGIC REACTION & NAUSEA. SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION & CORNEAL DAMAGE. INHALATION:
ALLERGIC REACTION & NAUSEA. SKIN: IRRITATION.
Medical Cond Aggravated by Exposure:SORES OR OPEN WOUNDS ON SKIN, &
KNOWN SENSITIVITY TO ACRYLICS.
First Aid
First Aid:EYES/SKIN: FLUSH W/WATER FOR AT LEAST 15 MINS. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND,
SELF-CONTAINED BREATHING APPARATUS OR EQUIVALENT.
Accidental Release
Spill Release Procedures:ELIMINATE IGNITION SOURCES. DIKE & ABSORB
W/INERT MATERIAL *SAND, SODA, ASH, VERMICULITE, ETC) & TRANSFER TO
AN APPROPRIATE CONTAINER FOR DISPOSAL.
Handling
Handling and Storage Precautions:STORE AT AMBIENT TEMPERATURES OUT OF
DIRECT SUNLIGHT & HEAT. KEEP AWAY FROM FLAME & SPARKS. KEEP AWAY
FROM FOOD & BEVERAGES.
Exposure Controls
Ventilation:LOCAL EXHAUST IS RECOMMENDED USING MECHANICAL
W/EXPLOSION-PROOF MOTORS
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:IMPERVIOUS APRON
Work Hygienic Practices:OBSERVE NORMAL CARE WHEN WORKING W/CHEMICALS.
Supplemental Safety and Health
BOILING POINT: MAY GEL FIRST.
Chemical Properties
Boiling Pt:B.P. Text:SEE SUPP.
Spec Gravity:1.1
Solubility in Water:INSOLUBLE
Appearance and Odor:THICK, LIGHT YELLOW LIQUID W/CHARACTERISTIC ODOR
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:DAYLIGHT MAY GEL PRODUCT
Hazardous Decomposition Products:ACID FUME, CO &/OR CO2
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE, &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.